What this calculator gives you
- The joist size that works — the smallest of 2x6, 2x8, 2x10 and 2x12 that spans your span and carries your overhang, or a check of the size you picked.
- Every option at a glance — how far each size spans at your spacing, against your span, and the full table for 12", 16" and 24" spacing.
- The overhang — the cantilever the table allows at your back span, interpolated between its columns.
- Checks — the spacing your decking needs, and where the AWC DCA 6 deck guide is stricter: overhang, joist length, and 2x8 joists and rims where guard posts attach.
Maximum deck joist spans, 40 psf live load
IRC 2021 Table R507.6, No. 2 grade, wet service, 10 psf dead load. Feet-inches, at 12", 16" and 24" on center:
| Joist | Southern pine | Douglas fir / hem-fir / SPF | Redwood / western cedars / ponderosa or red pine | ||||||
|---|---|---|---|---|---|---|---|---|---|
| 12" | 16" | 24" | 12" | 16" | 24" | 12" | 16" | 24" | |
| 2×6 | 9' 11" | 9' | 7' 7" | 9' 6" | 8' 4" | 6' 10" | 8' 10" | 8' | 6' 10" |
| 2×8 | 13' 1" | 11' 10" | 9' 8" | 12' 6" | 11' 1" | 9' 1" | 11' 8" | 10' 7" | 8' 8" |
| 2×10 | 16' 2" | 14' | 11' 5" | 15' 8" | 13' 7" | 11' 1" | 14' 11" | 13' | 10' 7" |
| 2×12 | 18' | 16' 6" | 13' 6" | 18' | 15' 9" | 12' 10" | 17' 5" | 15' 1" | 12' 4" |
Snow-load tables (50, 60 and 70 psf ground snow) are built into the calculator. The table does not allow extrapolation: a span longer than it lists needs a beam to shorten it.
How the numbers are worked out
The calculator reads IRC 2021 Table R507.6 for your lumber, load and spacing and picks the smallest joist whose span is at least yours and whose cantilever at your back span is at least your overhang. Cantilevers are interpolated between the table's back spans (4' to 18'), as its footnote allows, and never exceed a quarter of the back span. Limits are rounded down when shown, so a span never reads longer than the table allows, and your span and overhang are checked exactly as shown, to the 1/16" or the millimetre. The 3D model is the deck material calculator's framing for a 12' wide deck with your span, overhang, size and spacing.
Frequently asked questions
How far can a 2x8 deck joist span?
At 16" on center and 40 psf live load (IRC 2021 Table R507.6): 11' 10" in Southern pine, 11' 1" in Douglas fir, hem-fir or SPF, and 10' 7" in redwood or cedar. At 12" on center the Douglas fir span is 12' 6"; at 24" it is 9' 1". Snow loads shorten every span.
How far can a 2x10 deck joist span?
At 16" on center and 40 psf live load (IRC 2021 Table R507.6): 14' in Southern pine, 13' 7" in Douglas fir, hem-fir or SPF, and 13' in redwood or cedar. At 12" on center the Douglas fir span is 15' 8"; at 24" it is 11' 1". Snow loads shorten every span.
How far can a 2x6 deck joist span?
At 16" on center and 40 psf live load (IRC 2021 Table R507.6): 9' in Southern pine, 8' 4" in Douglas fir, hem-fir or SPF, and 8' in redwood or cedar. At 12" on center the Douglas fir span is 9' 6"; at 24" it is 6' 10". Snow loads shorten every span. The ledger on the house still has to be a 2x8 or deeper.
How far can deck joists overhang the beam?
The IRC lists the cantilever by the joist's back span, never more than a quarter of it, and checks it with a 220 lb load at the end. For example, 2x10 Douglas fir joists with a 12' back span may overhang 3'; 2x6 joists with a 10' back span may not overhang at all. AWC DCA 6 lists overhangs by joist spacing instead, and in some cases allows less.
What joist spacing do I need for my decking?
The decking sets the widest spacing: PT 5/4×6 boards need joists 16" on center (12" on a diagonal), PT 2×6 boards allow 24", and composite boards follow the maker's guide — usually 16" (12" on a diagonal). Then pick the joist size that spans at that spacing.
Do snow loads change joist spans?
Yes. 2x10 Douglas fir joists at 16" on center span 13' 7" at 40 psf, 13' 3" at 50 psf ground snow, 12' 4" at 60 psf and 11' 6" at 70 psf. Your building department publishes the ground snow load for your area.
Where is a joist span measured?
Between the supports — from the ledger on the house (or a beam) to the beam — as IRC Figure R507.6 draws it. The part past the beam is the overhang (cantilever), which the table limits separately. AWC DCA 6 lists the same numbers as clear spans, 3" shorter than the engineered span.
Planning the rest? Deck material calculator · Deck footing calculator · Deck stair calculator